heat sink

The paper analyzed and discussed two-dimensional heat sink in theory.

本文对二维的热沉问题进行了理论分析和讨论。

How to select the suitable heat sink?

如何选择合适的散热片?

The array can use screws to fix on the heat-sink.

LED面光源能使用螺丝固定于散热器上.

Equivalent absorption characteristics of thermal radiation of heat sink in space environment simulator

空间环境模拟器热沉热辐射当量吸收特性研究

Analyses of Heat Sink in Low Temperature Measurement

低温测量中热沉的分析

Vascular inflow occlusion theoretically enhances the effect of tissue freezing by removing the so-heat sink phenomenon.

脉管流阻塞理论上可以根据移除了吸热现象的影响而增加了组织的冷冻效果.

In this paper, we analyzed and discussed size effect of two-dimensional heat sink in theory.

本论文还计算分析了二维椭圆形热沉的尺寸效应，计算结果与分析表明利用二维热沉比一维热沉更可取，在热沉使用中对漏热与尺寸问题进行了比较仔细的讨论。

The main production including large, medium and small cars, construction machinery dedicated heat sink and cooler.

主要生产大 、 中、小型汽车 、 工程机械专用散热器和中冷器.

Experimental Study on Thermosyphon Heat Sink for Cooling of Electronic Apparatus

电子器件冷却用重力型热管散热器的实验研究

The heat-sink method has a fast warm-up time.

渗热法预热快.

LED chip and heat sink for thermal connection to solve the thermal grease, thermal paste difficult operation, uneven coating, plastic overflow problem caused by defective products.

用于LED芯片和散热器导热连接，解决了散热膏，导热膏难操作，涂不均匀，溢胶造成不良品的难题。

In succession, the paper calculated and analyzed size effect of heat sink in the low-temperature measurement.

接着论文主要计算分析了低温测量中热沉的尺寸效应.

Presented a typical heat sink in a space simulator with heat transfer model.

通过建立传热数学模型以及求解，给出了空间环境模拟器中热沉热均匀性优化的结果。

For constant fin width, the heat sink with the highest fins has the best thermal performance.

在固定散热片宽度的条件下, 高度最高的散热片有最佳的散热效果.

This paper focuses on the heat sink temperature and radiator cooling air flow characteristics around, have proposed a design of permeable structures in the middle and the bottom surface of substrate at both ends of the radiator slot.

本文针对散热器的温度场和散热器周围冷却空气流动的特点，提出了一种透空型结构设计，在散热器基板底面中间和两端开槽。

Therefore, the increase channel height results in lower heat sink temperatures.

因此, 通道高度的增加可导致热沉温度的降低.

Complex heat sink devices, including liquid cooled cold plates and stacked fins with heat pipes.

复杂的散热器产品, 其中包括液体冷却的冷板块和堆叠鳍片与热管.

Optimization design of structural size of microchannel cooling heat sink

微槽冷却热沉结构尺寸的优化设计

Numerical study on key factors influencing the structure of heat sink

热沉结构设计中关键因素的仿真研究

Thermal Design of Heat Sink for T/ R Module

T/R组件的散热设计

The thermal controlling principle of the temperature gradient heat sink is discussed.

本文探讨了利用温度控制波长的原理，提出了温度梯度热沉的初步设想，及耦合光学系统的设计。

Temperature detector should be installed on the upper part of Heat Sink.

温度传感器应该装在散热器的上部.

Finite element analysis on steady-state thermal resistance of heat sink of power semiconductors for locomotive

机车大功率半导体散热器稳态热阻的有限元分析

Thermal design of power component and optimal design of heat sink

功率器件热设计及散热器的优化设计

Therefore, the average heat sink temperature decreases as air Reynolds number increases.

因此, 平均散热器的空气温度随雷诺数增加.

Very high heat sink capacity of the MEPCM was found by DSC method.

最后的dsc热 分析表明了MEPCM具有很高的蓄热能力.

However, this parameter has slightly effect on average heat sink temperature.

但此参数对平均热沉温度影响较微弱.

Failure phenomenon: a mistake of the CPU heat sink Nongdiao the Button.

故障现象: 一次误将CPU散热片的扣具弄掉了.

Therefore, the average heat sink temperature decreases as air number increases.

因此, 平均热沉温度随气流雷诺数的增加而降低.

Heat Pipe Sink and Its Application in Giant Magnetizing Power Cabinet Using Φ 100mm Thyristor

热管换热器及其在Φ100mm晶闸管巨型励磁柜的应用